Free share part of Cisco 300-430 exam dumps, free Cisco 300-430 exam dumps part from Lead4pass 300-430！
All lead4pass exam questions and answers have been verified and are 100% true and valid! Get the complete Cisco 300-430 PDF Dumps and VCE Dumps here: https://www.leads4pass.com/300-430.html (Total Questions: 123 Q&A)

Cisco 300-430 free dumps online sharing, you can participate in the online test

The answer is obtained at the end of the article

QUESTION 1

A wireless engineer must implement a corporate wireless network for a large company in the most efficient way
possible. The wireless network must support 32 VLANs for 300 employees in different departments. Which solution
must the engineer choose?

A. Configure a second WLC to support half of the APs in the deployment.
B. Configure one single SSID and implement Cisco ISE for VLAN assignment according to different user roles.
C. Configure different AP groups to support different VLANs, so that all of the WLANs can be broadcast on both radios.
D. Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to be broadcast on the 5.0- GHz band.

QUESTION 2

After receiving an alert about a rogue AP, a network engineer logs into Cisco Prime Infrastructure and looks at the floor
map where the AP that detected the rogue is located. The map is synchronized with a mobility services engine that
determines that the rogue device is actually inside the campus. The engineer determines that the rogue is a security
threat and decides to stop if from broadcasting inside the enterprise wireless network. What is the fastest way to disable the rogue?

A. Go to the location where the rogue device is indicated to be and disable the power.
B. Create an SSID similar to the rogue to disable clients from connecting to it.
C. Update the status of the rogue in Cisco Prime Infrastructure to contained.
D. Classify the rogue as malicious in Cisco Prime Infrastructure.

QUESTION 3

An engineer is implementing profiling for BYOD devices using Cisco ISE. When using a distributed model, which
persona must the engineer configure with the profiling service?

A. Policy Services Node
B. Device Admin Node
C. Monitor Node
D. Primary Admin Node

QUESTION 4

Refer to the exhibit.

An engineer deployed a Cisco WLC using local EAP. Users who are configured for EAP-PEAP cannot connect to the
network. Based on the local EAP debug controller provided, why is the client unable to connect?

A. The client is falling to accept certificate.
B. The Cisco WLC is configured for the incorrect date.
C. The user is using invalid credentials.

QUESTION 5

An engineer must track guest traffic flow using the WLAN infrastructure. Which Cisco CMX feature must be configured
and used to accomplish this tracking?

A. analytics
B. connect and engage
C. presence
D. detect and locate.

QUESTION 6

Which two configurations are applied on the WLC to enable multicast, check multicast stream subscriptions, and stream content only to subscribed clients? (Choose two)

A. Enable IGMP snooping
B. Set the IGMP timeout to 180 seconds
C. Enable broadcast forwarding
D. Enable 802.3x flow control mode.
E. Set the AP multicast to 238.255.255.255

https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/81671-multicast-wlc-lap.html

QUESTION 7

An engineer just added anew MSE to Cisco Prime Infrastructure and wants to synchronize the MSE with the Cisco 5520
WLC, which is located behind a firewall in a DMZ. It is noticed that NMSP messages are failing between the two
devices. Which traffic must be allowed on the firewall to ensure that the MSE and WLC can communicate using NMSP?

A. TCP 1613
B. UDP 16113
C. TCP 16113
D. UDP 1613

hnps:\\’/vvw\vxJsco.com\\’c/en;us\\’support;docsAvJreless\\’5500-series-wJreless-controllers/113344- cuwn-ppm html
https:\\’/mrncciewxom/2014/09/25/what-is-nmsp/ https:\\’/mvwxiscoxomx/en\\’us\\’support/docs\\’wireless\\’mo

QUESTION 8

The IT manager is asking the wireless team to get a report for all guest user associations during the past two weeks. In
which two formats can Cisco Prime save this report? (Choose two.)

A. CSV
B. PDF
C. XLS
D. DOC
E. plain text

QUESTION 9

What is the default NMSP echo interval between Cisco MSE and a Wireless LAN Controller?

A. 10 seconds
B. 15 seconds
C. 30 seconds
D. 60 seconds

QUESTION 10

What must be configured on the Global Configuration page of the WLC for an access point to use 802.1x to authenticate to the wired infrastructure?

A. supplicant credentials
B. RADIUS shared secret
C. local access point credentials
D. TACACS server IP address.

QUESTION 11

Refer to the exhibit.

A network administrator deploys the DHCP profiler service in two ISE servers: 10.3.10.101 and 10.3.10.102. All BYOD
devices connecting to WLAN on VLAN63 have been incorrectly profiled and are assigned as unknown profiled
endpoints. Which action efficiently rectifies the issue according to Cisco recommendations?

A. Nothing needed to be added on the Cisco WLC or VLAN interface. The ISE configuration must be fixed.
B. Disable DHCP proxy on the Cisco WLC.
C. Disable DHCP proxy on the Cisco WLC and run the ip helper-address command under the VLAN interface to point to
DHCP and the two ISE servers.
D. Keep DHCP proxy enabled on the Cisco WLC and define helper-address under the VLAN interface to point to the
two ISE servers.

https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/110865-dhcp-wlc.html

QUESTION 12

Which two steps are needed to complete integration of the MSE to Cisco Prime Infrastructure and be able to track the location of clients/rogues on maps? (Choose two.)

A. Synchronize access points with the MSE.
B. Add the MSE to Cisco Prime Infrastructure using the CLI credentials.
C. Add the MSE to Cisco Prime Infrastructure using the Cisco Prime Infrastructure communication credentials
configured during set up.
D. Apply a valid license for Wireless Intrusion Prevention System.
E. Apply a valid license for location tracking.

https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/33/user/guide/bk_CiscoPrimeInfrastructure_3_3_0_UserGuide/bk_CiscoPrimeInfrastructure_3_3_0_UserGuide_chapter_0100110.html

QUESTION 13

An engineer has implemented advanced location services for a retail wireless deployment. The marketing department
wants to collect user demographic information in exchange for guest WLAN access and to have a customized portal per location hosted by the provider. Which social connector must be tied into Cisco CMX to provide this service?

A. Gmail
B. Google+
C. Facebook
D. MySpace

Verify answer:

Free Cisco 300-430 exam PDF download online

Google Drive: https://drive.google.com/file/d/1fXdnq4xilUOcY7pT3qymmiqBkvOS1Bos/

Thanks for reading! The free Cisco 300-430 exam dumps are part of the Lead4Pass 300-430 dumps.
To get the complete 300-430 dumps with PDF and VCE, please visit https://www.leads4pass.com/300-430.html (PDF+VCE) Like, please bookmark and share!

PS. In VceCert.com we have updated the free dumps of all Cisco series. If you or your friends want more cisco exam dumps, you can go directly to VceCert.com.