Cisco 300-710 exam questions and answers have been updated to share online first, you can download Cisco 300-710 dumps with PDF and VCE exam engine https://www.exam2pass.com/300-710.html, practice 238 latest Cisco 300-710 exam questions.
exam2pass 300-710 Dumps has a 99.5% exam pass rate, and 365-day free updates, and is suitable for beginners and IT professionals alike.
Download the Cisco 300-710 PDF for free sharing online:
https://drive.google.com/file/d/1HfkLzbHVfoCRWWX1dQKg483ahxPxoQHR/
Online practice for some of the latest Cisco 300-710 exam questions available online:
New Question 1:
DRAG DROP
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Select and Place:
Correct Answer:
New Question 2:
What is the result of enabling Cisco FTD clustering?
A. For the dynamic routing feature, if the master unit fails, the newly elected master unit maintains all existing connections.
B. Integrated Routing and Bridging are supported on the master unit.
C. Site-to-site VPN functionality is limited to the master unit, and all VPN connections are dropped if the master unit fails.
D. All Firepower appliances can support Cisco FTD clustering.
New Question 3:
Which two conditions are necessary for high availability to function between two Cisco FTD devices? (Choose two.)
A. The units must be the same version
B. Both devices can be part of a different group that must be in the same domain when configured within the FMC.
C. The units must be different models if they are part of the same series.
D. The units must be configured only for firewall routed mode.
E. The units must be the same model.
New Question 4:
On the advanced tab under inline set properties, which allows interfaces to emulate a passive interface?
A. transparent inline mode
B. TAP mode
C. strict TCP enforcement
D. propagate link state
New Question 5:
What are the minimum requirements to deploy a managed device inline?
A. inline interfaces, security zones, MTU, and mode
B. passive interface, MTU, and mode
C. inline interfaces, MTU, and mode
D. passive interface, security zone, MTU, and mode
New Question 6:
What is the difference between an inline and an inline tap on Cisco Firepower?
A. Inline tap mode can send a copy of the traffic to another device.
B. Inline tap mode does full packet capture.
C. Inline mode cannot do SSL decryption.
D. Inline mode can drop malicious traffic.
New Question 7:
With Cisco Firepower Threat Defense software, which interface mode must be configured to passively receive traffic that passes through the appliance?
A. inline set
B. passive
C. routed
D. inline tap
New Question 8:
Which two deployment types support high availability? (Choose two.)
A. transparent
B. routed
C. clustered
D. intra-chassis multi-instance
E. virtual appliance in public cloud
New Question 9:
Which protocol establishes network redundancy in a switched Firepower device deployment?
A. STP
B. HSRP
C. GLBP
D. VRRP
New Question 10:
Which interface type allows packets to be dropped?
A. passive
B. inline
C. ERSPAN
D. TAP
New Question 11:
Which Cisco Firepower Threat Defense, which two interface settings are required when configuring a routed interface? (Choose two.)
A. Redundant Interface
B. EtherChannel
C. Speed
D. Media Type
E. Duplex
New Question 12:
Which two dynamic routing protocols are supported in Firepower Threat Defense without using FlexConfig? (Choose two.)
A. EIGRP
B. OSPF
C. static routing
D. IS-IS
E. BGP
New Question 13:
Which policy rule is included in the deployment of a local DMZ during the initial deployment of a Cisco NGFW through the Cisco FMC GUI?
A. a default DMZ policy for which only a user can change the IP addresses.
B. deny IP any
C. no policy rule is included
D. permit IP any
New Question 14:
What are two application layer preprocessors? (Choose two.)
A. CIFS
B. IMAP
C. SSL
D. DNP3
E. ICMP
New Question 15:
Which two OSPF routing features are configured in Cisco FMC and propagated to Cisco FTD? (Choose two.)
A. OSPFv2 with IPv6 capabilities
B. virtual links
C. SHA authentication to OSPF packets
D. area boundary router type 1 LSA filtering
E. MD5 authentication to OSPF packets
...
Verify the answer:
Numbers: | Q1 | Q2 | Q3 | Q4 | Q5 | Q6 | Q7 | Q8 | Q9 | Q10 | Q11 | Q12 | Q13 | Q14 | Q15 |
Answers: | IMAGE | C | AE | D | C | A | B | AB | A | B | CE | BE | C | BC | BE |
Download the Cisco 300-710 PDF for free sharing online:
https://drive.google.com/file/d/1HfkLzbHVfoCRWWX1dQKg483ahxPxoQHR/
The above Cisco 300-710 exam questions you participated in can only help you warm up and get 238 Cisco 300-710 exam questions and answers: https://www.exam2pass.com/300-710.html, help you truly successfully pass Cisco 300-710 SNCF exam.
More IT certification blogs: [Amazon]awsexamdumps.com, [Oracle]oraclefreedumps.com, [Cisco]ciscofreedumps.com, [Microsoft]examdumpsbase.com, [Citrix]citrixexamdumps.com
[CompTIA]comptiafreedumps.com, [VMware]vmwarefreedumps.com, [IBM]ibmexamdumps.com, [HP]hpexamdumps.com, [NetApp]netappexamdumps.com, [Juniper]juniperexamdumps.com
[Fortinet]fortinetexamdumps.com